Top 10 Smartphone Car Mount Holder – Cell Phone Automobile Cradles

As an Amazon Associate I earn from qualifying purchases.

1. iOttie

#ad

Smartphones, iOttie Easy One Touch 5 Dashboard & Windshield Universal Car Mount Phone Holder Desk Stand for iPhone, LG, Nokia, Samsung, Huawei, Moto

#ad
iOttie #ad - Magnetic cord organizer: Keep charging cables neatly organized with the magnetic tab located near the bottom foot. Wide compatibility: new larger Easy One Touch button, with a universal cradle that fits smartphones and cases of any size.

Mount or remove your phone in seconds with the patented Easy One Touch Mechanism. Adjustable bottom foot: You can easily and securely adjust the bottom foot by squeezing the spring button. Easy one touch mechanism: press the locking side arms with a quick one-handed motion, and place your phone against the trigger button.

This enables a myriad of customized viewing angles while you’re on the road. The mount’s arms will close automatically, holding your device securely while you drive. Telescopic arm: the improved telescopic arm now extends from 5 inches to 8 inches as opposed to the Easy One Touch 4 which only extended to 6. 5inch and pivots 260 degrees.
BrandiOttie #ad
ManufactureriOttie #ad
Height4 Inches
Length6.5 Inches
Weight0.45 Pounds
Width4.2 Inches
Part NumberHLCRIO171AM
ModelOne Touch 5
Warranty2 year manufacturer

2. Qifutan

#ad

Cell Phone Holder for Car Phone Mount Long Arm Dashboard Windshield Car Phone Holder Strong Suction Anti-Shake Stabilizer Phone Car Holder Compatible with All Phone Android Smartphone

#ad
Qifutan #ad - One-hand operation: press the button on the lower back of the car mobile phone holder to take out your phone, and press the back edge of the clamping arms to secure your phone with one hand. Most importantly, you can bend it in every direction to avoid obstructing the view.

Secure steady installation: qifutan car mount for iphone 13/12/11 features an extra-strong vacuum suction cup with a layer of super sticky gel, a locking lever, and an anti-shake stabilizer. It sticks securely and easily on the windshield or most flat surfaces and removes the phone car mount without leaving any nasty marks. Broad vision: qifutan cell phone car mount features a 16cm/6. 2in aluminum long gooseneck that sends your phone much closer to you. Ideal viewing angle: the car phone mount features a 360° rotating ball joint that allows you to switch it from portrait to landscape view quickly, for getting the best viewing angle.

Note: only use the extra dashboard pad when the suction cup can not attach on the surface closeLY. Note: the car mount need a big enough flat surface to make the adhesive attached closely and completeLY. Fit well for the smartphone which’s the width between 4''-7''in and the most thickness. Note: use warm water to wash the car holder's suction cup if the surface is dirty or it can not stick firmly, then let it air dry.
BrandQifutan #ad
ManufacturerQifutan #ad
Part NumberHD-C77
ModelHD-C77

3. Loncaster

#ad

Samsung, Car Phone Mount Silicone Car Pad Mat for Various Dashboards, Loncaster Car Phone Holder, Black, GPS Devices and More, Slip Free Desk Phone Stand Compatible with iPhone, Android Smartphones

#ad
Loncaster #ad - Stable & slip free : dependents on its soft silicone-textured bottom and sticky pads, scratching or flying out whenever there is an emergency braking, it can protect phone against bumping, sudden stop and sharp turn.

Just rinse with water and dry it, it will be the same as the new one. Widely compatibility : the dashboard cell phone holder is suitable for most kinds of cell phones or gps devices which are between 6-12mm thick. Washable & reusable : the bottom of the car phone holder is made from high-tech adhesives. Including iphone 11/11 pro/11 pro max/ xr/ xs/ xs max/ x/8/8 plus/7/7 plus/ 6s /6s plus/6/6 plus/5se/5s/5/4s, s 20 plus/ 8 plus / 9 plus /10 plus, s20/s 8 /9 /10, Sony, Pixel, HTC, Mi, Nexus, S 7 Edge, Huawei, LG, IPAD, Samsung Galaxy Note 8 /9/10 /10 pro/20 ultra, Garmin and so on.

Use tips : peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean no dust before laying the holder on.
BrandLoncaster #ad
ManufacturerLoncaster #ad
Height1.8 Inches
Length4.8 Inches
Weight0.37 Pounds
Width4.8 Inches
Part Numberyx-40
Model40

4. andobil

#ad

Andobil Car Phone Holder Mount 2022 Upgraded Smartphone Air Vent Holder Easy Clamp Hands-Free Compatible with iPhone 13 12 11 Pro Max 8 Plus X XR XS SE Samsung Galaxy S22/S21/S20+/S10/S9/Note 20/10

#ad
andobil #ad - Our easy clamp car phone holders have improved the clips to solve the breakage issues. It is the first one within the market that adapts the aviation material “PTFE”, Andobil Specialized in holder, do more professionally. Hold your phone steadily : andobil phone mount holder has anti-slip rubber pads, firm & scratch-free claw offer secure grip for your cellphone to ensure safer driving The smart phone will securely stay in the car cradle like a baby, stable support shelf, which won't distract you from driving.

Guard your travel : thanks to our customers real voice. Holder expert, this car phone holder could hold your phone firmly even on the bumpiest road. With the metal vent clip stronger & tighter, so andobil holder could work well for you in extremely harsh environments.

What's more, which not only made it easier to press it, 000 times open&close by repeated tests. No. 1 adjustable foot design : andobil product manager designed the first adjustable foot of car phone holders on Amazon. We cannot guarantee that this product fits all air vents in the market. Most comfortable operation : andobil design engineers upgraded the switch button, Andobil car phone brackets can withstand more than 20, but also made it quick to open the arm for only 01s.
Brandandobil #ad
Manufacturerandobil #ad
Height3.35 Inches
Length4.8 Inches
Weight0.21 Pounds
Width2.95 Inches
Part Numberandobil

5. LISEN

#ad

LISEN Car Phone Holder Mount, Easily Install Magnetic Phone Car Mount 6 Strong Magnets Cell Phone Holder for Car Case Friendly iPhone Car Holder Compatible with All Smartphones & Tablets

#ad
LISEN #ad - It is recommend that use the “square pad” on the back of your phone/case. Lock your phone firmly: lisen magnetic phone car mount with 6 built-in strong magnets, the maximum bearing up to weight of 4 cellphones. 2. The cell phone holder for car is borned for innovation & practicabiliTY, it solving the market’s common problem of being easy to fall off over time.

Upgraded clip: this car phone holder mount is designed as “hook shape” and form “three grasp points” which can vise the outlet blades tightly and ensure it never fall off in any situation. Any device needs to use the metal palte even iphone 12 and iPhone13. The car holder holds most smartphones and mini tablets compatible with iPhone 13 12 11 pro max / 8/7/6/5, iPad Air 2 / XR / X / Pro 9.7 and more. This product cannot work with MagSafe.

Then finish the installation. Note: this phone holder only compatible with horitable air vent and not compatible wiTH VERTICAL OR ROUND AIR VENT. Quality is strictly controlled. Easy installation: benefit from the special design of the clamp, this iphone car mount is quite easy to install, just need to put it on the car’s outlet blades and adjust the length of clamp by turning the knob to match the outlet. Powerful suction keep your cellphone stay stably even when drive on a bumpy road.
BrandLISEN #ad
ManufacturerLISEN #ad
Height2.56 Inches
Length1.93 Inches
Weight0.11 Pounds
Width1.42 Inches
Part NumberLV633-Black
ModelLV633
Warrantyone year

6. AINOPE

#ad

AINOPE Car Phone Holder Mount, 2022 Upgraded Gravity Phone Mount for Car Vent with Newest Hook Clip Auto Lock Hands Free Cell Phone Holder Car Mount Compatible with iPhone 13 Pro Max & All Phones

#ad
AINOPE #ad - Note:maximum thickness of device is 14mM 05in. This phone holder only compatible with horitable air vent. Auto lock, no more fall :this gravity slide-in car phone holder creatively features the auto-lock arm-slots that stretch on the side can auto adjust to hold phone more firmly without fears of bumps, Special curve of arms fit phone better.

Note:we recommend using the smaller phone<4. 7inch with phone CASE. Universal compatibility: this universal car cell phone holder will firmly hold all the smart phones 4-7in even with thicker case ≤14mm compatible with iphone 13 12 pro max/ 11 pro max/XR/X/8/7/6/5, Note 20 10/ Galaxy S10+/ S9/ S8 /S7 /S6 and more. Upgraded air vent hook: this car vent phone holder mount is designed as "hook shape" and form "three grasp points" which can firmly hook around the a/c vent for no slippage or movement.

It solving the market's common problem of falling forward and off the air vent constantly when going over bumps or turns. The phone was all-round protected by silicone rubber on the inside clamps. Note: the horizontal mode is not supporTED. No block vent & safer driving: this car vent phone mount with folding back structure is very neat and keep it small when not in use, only 1/2 card size and 3 inches away from the vent to still allow air flow. Easy to drop phone in and pick phone up with two fingers. Note: the length of clamp betweeN 0
BrandAINOPE #ad
ManufacturerAINOPE #ad
Height1.3 Inches
Length3.92 Inches
Width4.49 Inches
Part NumberAV640
ModelAV640-BLACK

7. Beam Electronics

#ad

Beam Electronics Phone Car Air Vent Mount Holder Cradle Compatible for iPhone 12 11 Pro Max XS XS XR X 8+ 7+ SE 6s 6+ 5s 4 Samsung Galaxy S4-S10 LG Nexus Nokia, Car Phone Holder Mount

#ad
Beam Electronics #ad - Sturdy, cradle-less and attractive device holding system. Suitable for width size from 1. 9 inch to 3. 7inch smart phone or electronic devices. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.

This car phone mount holder is compatible with most all cell phone devices. Single-handed operation: simple installation and removal of smart phones. Quick release button: press button on back of unit to slide open and then take out mobile phone. Broad compatibility: passed a wide range of tests, 6s, nokia, 5c, LG, 5s, htc, Samsung Galaxy S6, nexus, iPhone 7 7 Plus iPhone 6s Plus, fit for most cellphones, GPS Device.

360 degree rotation: the fully 360-degree rotation provide you with the best viewing angle. The holder ensures safe driving whether you are talking, navigating, listening to music or charging. Simplistic installation, Single-handed Operation, No Tools Needed.
BrandBeam Electronics #ad
ManufacturerBE #ad
Height5.51 Inches
Length2.72 Inches
Weight0 Pounds
Width3.39 Inches
Part NumberBeam Electronics Car Phone Holder Mount
ModelBeam Electronics Car Phone Holder Mount
WarrantyLifetime Warranty

8. VICSEED

#ad

VICSEED Car Phone Mount, Thick Case & Big Phones Friendly Long Arm Suction Cup Phone Holder for Car Dashboard Windshield Air Vent Hands Free Clip Cell Phone Holder Compatible with All Mobile Phones

#ad
VICSEED #ad - Vicseed upgrade 3 in 1 mobile phone holder for car adds a high-density silicone material with excellent resilience. Remove the car vent phone mount easily by pulling the suction pad without leaving any nasty marks. Good choice to most of the cars, can be universally mounted to your dashboard, taxis; good assistant for Uber, pickup trucks, trucks, SUV, Lyft drivers.

It easily sticks securely on the dashboard or most flat surfaces. Position your phone at the perfect angle to enjoy a more relaxed and safer drive. One-hand operation: the car mobile phone holder also features a One-button release system that enables you to lock or release your phone with just one hand operation. Fit well for all mobile phones between 4''-7''in width and most thick case. Perfect protection: say goodbye to the easy-scratched plastic panel car mount. Note: use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.

The unprecedented design makes leaves zero scratches on mobile devices. This car holder for cell phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. The car phone holder is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. 3 in 1 universal car mount: vicseed car cell phone holder made with airliner ptfe material, windshield or vent to meet your demand at your convenience and requirements.
BrandVICSEED #ad
ManufacturerVICSEED #ad
Height1.18 Inches
Length3.94 Inches
Weight0.73 Pounds
Width3.15 Inches
Part NumberSB-304
ModelBS-BIRD9384
Warranty30 Days

9. HHJ

#ad

Phone Mount for Car Super Stable & Easy Upgraded Air Vent Clip Car Phone Holder Mount Fit for All Cell Phone with Thick Case Handsfree Car Mount for iPhone Cell Phone Automobile Cradles Universal

#ad
HHJ #ad - Super easy to install: have the phone holder connected to the universal air vent clip, the total installation takes 5s only, that is it! No need to waste your good time to study the complex instruction. Truly durable & perfect protection: the surface of the car mount for iphone is fully protected by silicone, provides securely grip power and protects your costful phone from wear and tear.

Sleek phone mount for your beloved car. Thick case and big phone friendly: pulled out the adjustable feet, Google Pixel, what’s more, SAMSUNG, the car phone holder fits all mainstream smartphones like iPhone, it works for phone with thick cases like otter case. The car phone holder mount will stay in place even if you hit a bump or a sharp turn, which ensures a distraction-free road trip.

Adjustable as you wish: flexible adjustment makes this cell phone automobile cradle Versatile - Adjustable Bottom Foot to fit for all phones + Release Button behind to offer a more convenience operation + 360° Rotation Ball Joint to turn from portrait to landscape mode as your preference. Securely stable for most vents: with the extended vent clip, easy to hook the car phone holder on most AC vents by rotating the knob.
BrandHHJ #ad
ManufacturerHHJ #ad
Part NumberHD-C58-A
ModelHD-C58-A
Warranty2 year

10. Humixx

#ad

Humixx Car Phone Holder Mount Military-Grade Super Suction & Stable Universal Hands-Free Cell Phone Holder for Car Dashboard Windshield Air Vent Car Mount for iPhone Samsung All Smartphones & Cars

#ad
Humixx #ad - The ball joint and arm of this mobile phone car mount are 10 x sturdier than normal ones. Adjust car holder as you wish the humixx team selects aviation material peft and components lab-tested to ensure sturdiness. During driving, you can adjust this car cell phone holder according to your front passenger seat to avoid obstructing the sight and ensure driving stability and safety.

In addition, the silicone pad of vent clip can also protect your car from damage. 4 in 1 cell phone holder for car are you not sure which installation method is better for your car? no worries! The 4 in 1 car phone mount can be flexible placement. Also, taxis and more. Moreover, whenever you need us, Humixx employees will always be here and handle all problems for you. Adjustable 270° telescopic Arm/360° Rotation Ball Joint for optimal viewing angle. This cell phone car holder‘s clip adopts the 2021 latest improved twist-lock triangle stable mode vent clip Won't broken & Super Stable, braking or driving can be firm enough to hold at the air vent.

Just rinse with water and dry to restore the adhesion of phone car holder. Super stable & upgraded vent clip in terms of the stability of mobile phone holder for car, and built-in metal that on bumpy roads, Humixx is based on precise investigations of 1000+ users. Humixx smartphone mount for car uses an innovative shock-proof texture made of PU material. Dashboard & windshield & air vent & desk, suv, pickup trucks, with low temperatures in winter and heat in summer, you can choose to avoid the issue caused by environmental influences.
BrandHumixx #ad
ManufacturerHumixx #ad
Height3 Inches
Length5.6 Inches
Width4.5 Inches
Part NumberHM-ZKT-A1