Top 10 Phone Car Mount – Electronics Features

As an Amazon Associate I earn from qualifying purchases.

1. iOttie

#ad

LG, Moto, Nokia, Samsung, Smartphones, Huawei, iOttie Easy One Touch 4 Dash & Windshield Universal Car Mount Phone Holder Desk Stand for iPhone

#ad
iOttie #ad - Easy one touch lock/release: Patented easy one touch mechanism allows quick 1 hand open and close operation. Universal mounting: holds all phone and case combinations from 2.

3 inches to 3. 5 inches. Adjustable viewing: the newly re-designed telescopic arm extends from 4 – 6. 5 inch and pivots on 225 degree arc for a variety of optimal positions. Bottom foot: foot on the bottom of mount cradle can be adjusted side to side, up and down, or removed to hold smartphones and cases of all sizes. Strong suction: 1 time use dashboard disc and reusable suction cup combo offers superior stick strength.
BrandiOttie #ad
ManufactureriOttie #ad
Height9 Inches
Length3 Inches
Weight0.38 Pounds
Width5 Inches
Part Number852306006596
ModelEasy One Touch 4
Warranty2 year

2. VICSEED

#ad

VICSEED Car Phone Mount, Thick Case & Big Phones Friendly Long Arm Suction Cup Phone Holder for Car Dashboard Windshield Air Vent Hands Free Clip Cell Phone Holder Compatible with All Mobile Phones

#ad
VICSEED #ad - Secure stable install: the vicseed car cell phone mount features an extra strong suction cup with super sticky gel pad. Remove the car vent phone mount easily by pulling the suction pad without leaving any nasty marks. Position your phone at the perfect angle to enjoy a more relaxed and safer drive.

It easily sticks securely on the dashboard or most flat surfaces. One-hand operation: the car mobile phone holder also features a One-button release system that enables you to lock or release your phone with just one hand operation. Fit well for all mobile phones between 4''-7''in width and most thick case. Note: use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.

This car holder for cell phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. Long arm design & multiple viewing angle: the car mount for iphone 11 has a telescopic arm that extends from 4. 84" - 9. 05" and can pivot up or down for a variety of angles which optimizes viewing capabilities. Good choice to most of the cars, trucks, Lyft drivers. The unprecedented design makes leaves zero scratches on mobile devices.
BrandVICSEED #ad
ManufacturerVICSEED #ad
Height1.18 Inches
Length3.94 Inches
Weight0.73 Pounds
Width3.15 Inches
Part NumberSB-304
ModelBS-BIRD9384
Warranty30 Days

3. andobil

#ad

Holder Expert andobil Car Phone Mount Easy Clamp, Safe Driving & Bumpy Roads Friendly Hands-Free Universal Dashboard Windshield Air Vent Phone Holder Car Fit for All Phones iPhone Samsung

#ad
andobil #ad - Good choice to almost all cars, Andobil Specialized in making holders, whether dashboard, windshield or vent. Holder expert, trucks, suv, so we do more professionally. You can always contact us to get a replacement. Perfect protection, which ensures fully protection of your beloved phone.

No need to lower your head or distract you while driving. Easy operation, making this car mount fit for all 4. 0-7. 0in phones and case combinations, thicker and wider clamp, Wide Compatibility Just a simple touch with one hand to release or lock your cell phone within seconds - Super easy to use while driving. The car phone mount fits almost car dashboards. If the phone car holder cannot be used for your car or not working well for you.

Moreover, best design andobil phone holder for car is made with aerospace grade PTFE material and vacuum airbag, The internal mechanical structure ensures the arm hold the phone strongly. No need to worry about your phone falling anymore. Expert team will definitely give you a satisfying solution. 3-in-1 version can help users find the best mounting position. Andobil mount with adjustable foot, such iPhone Samsung Oneplus.
Brandandobil #ad
ManufacturerAndobil #ad
Height5.8 Inches
Length3.5 Inches
Weight0.37 Pounds
Width3 Inches
Part Numberandobil-US
ModelCTEZ47

4. Miracase

#ad

Air Vent Phone Holder for Car,Miracase Universal Vehicle Cell Phone Mount Cradle with Adjustable Clip Compatible with 12/12 Pro/12 Pro Max/11 Pro Max/XR/XS Max/8 Plus,Galaxy S10/S10+ and More

#ad
Miracase #ad - Universal compatibilitymiracase air vent phone holder cradle is compatible with all cell phones and devices between 2. 1-4. 05 inches widesuch as thicker phone cases, Google, LG, Sony, navigation and more. For apple iphone 11/11 pro/11 pro max/xr/xs max/xs/x/8/8 plus/7/7 plus, samsung Galaxy S10/S10 Plus/S9/S8 Edge/Note 9, Huawei and More.

360 degree rotationthe 360-degree rotatable head will provide you with the best viewing angle to keep secure driving. You can place your phone in any orientationhorizontal, vertical and more, Just enjoy the best drving experience. Professional supportplease feel free to contact us in the first time for any product issues, a satisfied solution is promised forever. Provide you with safer driving whether you are talking, navigating, listening to music or charging.

Never fall off-classic series designmiracase car phone mount adopts 2019 latest locking design. One-hand operationwith quick release button and adjustable clamp arms, Miracase car phone mount makes it very easy to insert and remove your phone with single hand. The spring clip plate and the tightening nut will provide absolute fixation. It will never fall out like other products no matter how bumpy the road is. The clip hook will catch one of car air vent blades.
BrandMiracase #ad
ManufacturerMiracase #ad
Height1 Inches
Length15.9 Inches
Weight0.04 Pounds
Width7.9 Inches
Part NumberC-2
Model04001BLK

5. VICSEED

#ad

Upgrade Doesn't Slip & Drop Air Vent Cell Phone Holder for Car Hands Free Easy Clamp Cradle in Vehicle Compatible with All Apple iPhone Android Smartphone, VICSEED Car Phone Holder Mount

#ad
VICSEED #ad - It ensures a safe, distraction-free car environment. The phone car mount allows quick switching between vertically and landscape view. Position your phone at the perfect angle to enjoy a more relaxed and safer drive. Perfect protection: say goodbye to the easy-scratched plastic panel phone mount.

The car phone mount attaches easily and securely to most of air vent. Vicseed cell phone holder for car adds a upgrade high-density silicone material with excellent resilience. No need worry your phone will fall off from the samsung universal car mount. The car mount for phone is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. Secure stable install: the vicseed phone car holder with the latest improved vent clip won't broken & Drop off. Easy to adjust & multiple viewing angle: this car mount for phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles.

It ensures a safe, distraction-free car environment. After take few seconds to install it well, if you hit a bump or a sharper turn the car phone holder will stay in a place. Secure grip & one-button release: this car cell phone holder owns the thick arms built-in anti-slip rubber pads, which makes the iphone car mount can secure grip your mobile phone. The hands free cell phone holder for cars also features a One-button release system that enables you only take 01s to lock or release your phone with one hand operation.
BrandVICSEED #ad
ManufacturerVICSEED #ad
Height3 Inches
Length4.9 Inches
Width2.5 Inches
Warranty30 days

6. LISEN

#ad

Upgraded Clip Magnetic Phone Car Mount 6 Strong Magnets Cell Phone Holder for Car Case Friendly iPhone Car Holder Compatible with All Smartphones & Tablets, LISEN Car Phone Holder Mount

#ad
LISEN #ad - Any device needs to use the metal palte even iphone 12. It is recommend that use the “square pad” on the back of your phone/case. Powerful suction keep your cellphone stay stably even when drive on a bumpy road. 2. Note: this phone holder only compatible with horitable air vent and not compatible wiTH VERTICAL OR ROUND AIR VENT.

What's you get: 1*lisen magnetic phone car mount, 2*round metal pad, 1*rectangular metal pad, 2*round pe film, 1*rectangular pe film. The cell phone holder for car is borned for innovation & practicabiliTY, it solving the market’s common problem of being easy to fall off over time. Then finish the installation. Universal compatibility: universal air vent car phone holder will firmly hold most smart phones and mini tablets compatible with iphone 12 mini/12/12 pro/12 pro max/11/11 pro/11 pro max/XR/X/8/7/6/5, Note 9/ Galaxy S10/ S10+/ S10E/ S9/ S8 /S7 /S6 /Edge S6 /S5, iPad Air 2/Mini 3/ Pro 9.

7 and more. Lock your phone firmly: lisen magnetic phone car mount with 6 built-in strong magnets, the maximum bearing up to weight of 4 cellphones. Easy installation: benefit from the special design of the clamp, this iphone car mount is quite easy to install, just need to put it on the car’s outlet blades and adjust the length of clamp by turning the knob to match the outlet. It is more stable than the round. Upgraded clip: this car phone holder mount is designed as “hook shape” and form “three grasp points” which can vise the outlet blades tightly and ensure it never fall off in any situation.
BrandLISEN #ad
ManufacturerLISEN #ad
Height2.56 Inches
Length1.93 Inches
Weight0.11 Pounds
Width1.42 Inches
Part NumberLV633-Black
ModelLV633
Warrantyone year

7. LISEN

#ad

Upgraded Clip Magnetic Phone Car Mount 360° Rotate Unobstructed Car Phone Holder Mount Case Friendly iPhone Car Holder Compatible with All Smartphones & Tablets, LISEN Phone Holder for Car

#ad
LISEN #ad - Lisen brand laboratory has upgraded from 3 directions. You can 360° swivel and tilt the phone freely to avoid blocking the vent, and car cell phone holder vent front line of sight, dashboard, defeat sun glare. What you get 1*lisen magnet car phone holder mount, 1*Rectangular metal Pad, 1*Rectangular PE Film.

Thanks to the strong suction, your phone remains stable even on bumpy roads. If the product arrives doesn‘t fit a car or gets broken within 365 days, 2*Round metal Pad, 2*Round PE Film, please directly contact seller NiceTop for a satisfied solution. Upgraded groove and hook will firmly lock the vent, which really 100% solves the problem of the car vent phone mount holder drop from the vent. More stability, everything is just right. Upgrade curved arm to protect your phone from hot and cold wind from the vent; The most stable hook-shaped clip; Thickened high-quality Titanium Magnet Strong Magnet, ONLY COMPATIBLE WITH HORIZONTAL VENT.

Never block vent & driving sight: lisen magnetic phone holder for car vent unique 72. 4mm curved arm will giving you the best no block vent and safest driving vision. Please note: it is recommended to use the "square pad" on the back of your phone/case. This iphone car holder not compatible vertical or round air vent, less blocking: this phone car holder mount will be the most no-blocking and stable cell phone holder foe car mount solution. Thicker and high-quality magnets: lisen magnetic holder mount test 8lb corresponds approximately to the weight of 19 iPhone12.
BrandLISEN #ad
ManufacturerLISEN #ad

8. AINOPE

#ad

AINOPE Car Phone Holder Mount, 2021 Upgraded Gravity Phone Holder for Car Vent with Upgraded Hook Clip Auto Lock Hands Free Air Vent Cell Phone Car Mount Compatible with 4-7 inch Smartphone

#ad
AINOPE #ad - You can have a wider sight and adjust this gravity car phone holder up/down or left/right. No block vent & safer driving: with this car vent phone mount mounted on the air vent and its mini size - only 1/3 volume of traditional cell phone car mount after compacting, Besides, it won't block the air vent so that the air can flow better.

Universal compatibility: this universal car cell phone holder will firmly hold all the smart phones 4-7in even with thicker case ≤14mm compatible with iphone 12 pro max/ 11 pro max/XR/X/8/7/6/5, Note 20 10/ Galaxy S10+/ S9/ S8 /S7 /S6 and more. Easy to insert and remove your phone with one hand. Note:we recommend using the smaller phone<4. 7inch with phone CASE. Note:maximum thickness of device is 14mM-05in.

Note: the length of clamp betweeN 041-098in. Note: the horizontal mode is not supporTED. Auto lock, no more fall :this gravity slide-in car phone holder creatively features the auto-lock clamp arms can auto adjust to hold phone more firmly without fears of bumps, Special curve of arms fit phone better. Upgraded air vent clamp: this car vent phone holder mount is designed as "hook shape" and form "three grasp points" which can vise the outlet blades tightly.
BrandAINOPE #ad
ManufacturerAINOPE #ad
Height1.3 Inches
Length3.92 Inches
Width4.49 Inches
Part NumberAV640
ModelAV640-BLACK

9. Loncaster

#ad

Black, Loncaster Car Phone Holder, Car Phone Mount Silicone Car Pad Mat for Various Dashboards, Android Smartphones, Slip Free Desk Phone Stand Compatible with iPhone, Samsung, GPS Devices and More

#ad
Loncaster #ad - Just rinse with water and dry it, it will be the same as the new one. Widely compatibility : the dashboard cell phone holder is suitable for most kinds of cell phones or gps devices which are between 6-12mm thick.

Including iphone 11/11 pro/11 pro max/ xr/ xs/ xs max/ x/8/8 plus/7/7 plus/ 6s /6s plus/6/6 plus/5se/5s/5/4s, s 20 plus/ 8 plus / 9 plus /10 plus, pixel, lg, ipAD, S 7 Edge, Mi, HTC, S20/S 8 /9 /10, Sony, Huawei, Nexus, Samsung Galaxy Note 8 /9/10 /10 pro/20 ultra, Garmin and so on. Use tips : peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean no dust before laying the holder on.

Washable & reusable : the bottom of the car phone holder is made from high-tech adhesives. Stable & slip free : dependents on its soft silicone-textured bottom and sticky pads, it can protect phone against bumping, scratching or flying out whenever there is an emergency braking, sudden stop and sharp turn.
BrandLoncaster #ad
ManufacturerLoncaster #ad
Height1.8 Inches
Length4.8 Inches
Weight0.37 Pounds
Width4.8 Inches
Part Numberyx-40
Model40

10. Beam Electronics

#ad

Beam Electronics Phone Car Air Vent Mount Holder Cradle Compatible for iPhone 12 11 Pro Max XS XS XR X 8+ 7+ SE 6s 6+ 5s 4 Samsung Galaxy S4-S10 LG Nexus Nokia, Car Phone Holder Mount

#ad
Beam Electronics #ad - Single-handed operation: simple installation and removal of smart phones. Simplistic installation, Single-handed Operation, No Tools Needed. Press the arms on both side to clamp mobile phone again, simple of operation, save time and power.

Broad compatibility: passed a wide range of tests, fit for most cellphones, htc, iphone 7 7 plus iphone 6s plus, GPS Device. Sturdy, lg, 5c, samsung galaxy s6, 5s, 6s, Nexus, Nokia, cradle-less and attractive device holding system. Suitable for width size from 1. 9 inch to 3. 7inch smart phone or electronic devices.

Quick release button: press button on back of unit to slide open and then take out mobile phone. 360 degree rotation: the fully 360-degree rotation provide you with the best viewing angle. The holder ensures safe driving whether you are talking, navigating, listening to music or charging. This car phone mount holder is compatible with most all cell phone devices.
BrandBeam Electronics #ad
ManufacturerBE #ad
Height5.51 Inches
Length2.72 Inches
Weight0 Pounds
Width3.39 Inches
Part NumberBeam Electronics Car Phone Holder Mount
ModelBeam Electronics Car Phone Holder Mount
WarrantyLifetime Warranty